High temperature oven with high-quality aluminum silicate rock wool insulation; solid structure, light weight, easy to move, good thermal insulation performance; 1.5mm thick SUS304 # mirror stainless steel in the inner box, and 2.0mm cold rolled plate high temperature powder baking paint in the outer box; Constant temperature control system and over-temperature alarm protection system ensure the safe production of equipment.
Technical performance of high temperature oven:
1. Power supply: voltage 380V, three-phase five-wire system, total power 120KW / set (can be customized according to demand);
2. Temperature: The working temperature of the high-temperature industrial oven is room temperature + 80 ° C to 600 ° C. The heating and cooling rates can be set independently. The temperature can be adjusted arbitrarily, and can be automatically constant temperature at any temperature point;
3. The high temperature oven adopts three-sided air transport. The inner wall of the oven has a punching structure. The hot air in the oven flows out from the left and right sides and the bottom of the oven. The return flow from the inner top forms a cyclic flow. Within ± 2%;
4. The shell of the high temperature oven is well sealed, and the temperature rise of the outer wall of the cabinet does not exceed 50 ° C. Note: (The temperature rise may exceed 50 ° C where the hot air inside the oven can penetrate directly, such as at the door seams, the inlet and exhaust vents. .
5. The whole machine runs smoothly and meets industry standards. The noise during normal operation does not exceed 75 decibels.
6. Equipped with a wind transport motor detection device to effectively detect abnormal conditions of the wind transport motor. When the wind motor fails, the heating power will be cut off automatically. In order to prevent the electric heating tube from burning dry, the local temperature rise in the oven is too large. The wind volume can be automatically adjusted according to the parameters in the furnace to ensure that the temperature inside the oven is uniform.
7. Electrical control .: Power supply 380V, three-phase five-wire system, power 90KW, equipped with a control box on the right side of the oven, using Japanese conductive, H482 microcomputer intelligent LED digital display program temperature controller, which can be divided into up to 16 sections Program, module continuous buffer output control heater.