First, the box part
1. Outer dimension: D780 * W1380 * H1780 (mm), inner dimension: D600 * W1100 * H1100 (mm)
2. Oven materials: The outer plate is made of t1.5.0mm cold steel plate, the outer door is made of t2.0 cold plate welding, the other surfaces are polished and polished, and the entire surface of the cabinet is baked.
3.Inner plate: SUS201 # foot 1.0mm stainless steel plate is used for folding and pressing. All inner plates are punched to make the temperature of the wind even.
4. Reinforcement: T2.0mm cold plate bending welding, 50 * 50 (mm) thick square through welding
5. Air duct plate: made of USU304 # 1.5mm stainless steel plate. The oven is equipped with a dedicated air duct for circulating air. Forced air circulation is provided on both sides of the air duct to make the heating temperature uniform and automatically discharge the gas in the oven
6. Insulation: 100K environmental protection rock wool is used to fill the thickness of 100mm, and the surface temperature is ± 40 ° C.
Second, the heating system
The heating adopts high-temperature-resistant SUS304 # stainless steel heating tube with heat sink, which makes the temperature uniform and the tube has a long service life. The total temperature is 9KW, and the normal temperature can be adjusted to -40 ℃.
Third, the external door configuration
The oven is equipped with double doors, two sets of door hinges are installed on the left and right, and a set of high-precision pull locks are installed on the left. The door opening direction is from the middle to the two sides.
Fourth, sealing materials
The sealing strip is made of high-temperature-resistant foamed silica gel, and the door is installed with high-temperature-resistant foamed silica gel to enhance the insulation effect in the furnace.
V. ventilation device
There is an air inlet, an air outlet, and an adjustment switch above the box to make the temperature of the oven uniform.
Six, bottom configuration
3-inch heavy duty casters with brakes on the bottom side
7. Motor part
It adopts Shengjie brand high-temperature-resistant 1500W vertical motor, equipped with 12-inch galvanized wind impeller.
Temperature control adopts Taiwan RKC intelligent controller, SSR solid state relay for heating control, independent control on both sides of heating system, RKC thermostat for over temperature control, temperature to timing (automatic or manual function can be selected) → time to cut off heating → (□ After the alarm, you can choose to transport the wind □ or directly cut off the power) → After the wind is transported, choose to adjust the time to cut off the power → complete the instructions. (The oven is equipped with over-temperature protection. If there is over-temperature, an over-temperature alarm will be activated, and the power will be cut off directly after the alarm)
Nine, temperature control configuration
Thermostat uses Taiwan RKC intelligent temperature control meter 72 * 72 (mm), AC connector, electric control ammeter (Chint brand), voltmeter (Chint brand), timer (Chint brand), relay (Chint brand), Missing protector (Chint brand), indicator light (Chint brand), power switch (Chint brand), start stop switch (Chint brand), alarm (Chint brand), master switch (Chint), high temperature Taiwan K Electrical components such as thermocouples. Note: The electrical appliances used above have complied with national testing standards (the control box is placed above the oven).