First, the local parameters
Total length 4000mm * skin width 650mm (outer width 750mm) * height 750mm (furnace cover length 1800mm × 2 sections * furnace cover effective height 650mm.)
Second, the furnace body
1. Body material: The tripod is made of 50mm * 50mm * 1.5 mm thick iron square pass. The feet are equipped with adjustable horizontal angle cups.
2. Beam: The beam is made of 50mm * 50mm * 1.5 mm thick iron square pass.
3. Drying furnace body; The drying furnace is made of 1.5mm thick cold rolled plate. The exterior is sprayed with anti-rust paint and surface paint; each section is 6KW. A total of 2 sections (each section is equipped with a furnace cover)
A set of 375w long-axis high temperature motor with 9-inch Chiba wind wheel. 2 sets in total).
4. Galvanized sheet thickness of the inner tank material is 1.2mm. (1.22m * 2.44m).
5. Thermal insulation system: 80K aluminum silicate cotton 80mm rock wool thermal insulation.
6. Galvanized sheet thickness of 1.2mm. (1.22m * 2.44m) is adopted for the tunnel furnace supporting plate.
7.Machine head and tail sealing plate are made by bending and welding 1.2mm thick cold plate.
Third, the transmission system
Conveyor belt adopts anti-static green pvc belt, the main roller of the machine head adopts ￠ 160mm embossed roller, the main roller of machine tail adopts ￠ 60mm embossed roller.
Fourth, speed control
It adopts 1P Sanjing inverter with Shengjie 400W conjoined motor. It consists of a chain. The speed can be adjusted.
Five, electronic control system
Master switch, AC contactor, digital temperature controller for temperature control meter, voltmeter, ammeter, switch, indicator light, high temperature resistant wire, TV line, and other electrical switches (with independent control box, each The section oven can be turned up and cleaned).