1. Structure of industrial oven:
为内外双层结构，壳体为角钢薄钢板，内外双层壳体之间填充有纤维物质。 The industrial oven has a double-layer structure inside and outside, the shell is an angle steel sheet, and a fibrous substance is filled between the inner and outer double-layer shells. 使用的纤维物质多为硅酸铝纤维，它能起到保温的作用，形成可靠的保温层。 The fiber material used in industrial ovens is mostly aluminum silicate fiber, which can play the role of heat insulation and form a reliable heat insulation layer. 配置有热风循环系统及温度测量与控制系统。 The industrial oven is equipped with a hot air circulation system and a temperature measurement and control system. 应用的范围很广泛，可干燥各种工业物料，是通用的干燥设备。 Industrial ovens have a wide range of applications. They can dry a variety of industrial materials and are universal drying equipment.
The production capacity is determined to meet the production requirements and the production capacity is high. You can choose a drying production line, tunnel furnace, and drying tunnel. Low-capacity or experimental small ovens can be customized.
10 度即可。 Choose 10 degrees higher than the actual use temperature . According to the process requirements, calculate the actual required temperature difference to ensure the effect of baking. 160 度， 220 度， 360 度， 440 度，按最高设计温度 500 度做。 Example: If the use temperature is 160 degrees, 220 degrees, 360 degrees, 440 degrees, the maximum design temperature is 500 degrees. 个温度，如果是同一种产品。 4 temperatures, if it is the same product. Control is best to use SCR. Different products have slightly larger temperature differences when used at low temperatures. 度和 220 度的实际使用效果，没有低温烤箱好。 160 degrees and 220 degrees of actual use, not as good as a low temperature oven. 500 度烤箱， 160 度烘烤温差比低温 250 度烤箱要高 2~5 度。 Use a medium-temperature 500- degree oven. The 160- degree baking temperature difference is 2 to 5 degrees higher than a low-temperature 250- degree oven . It depends on the quality of the manufacturers' equipment. 0-250 度 ) 、中温 250-600 度 ) 、高温 (600-1500 度）超过 1200 度公司建议采用碳硅棒加热，完全可以根据产品的工艺要求选择。 The oven is divided into low temperature ( 0-250 degrees ) , medium temperature ( 250-600 degrees ) , high temperature (600-1500 degrees) more than 1200 degrees. The company recommends using carbon-silicon rods for heating, which can be selected according to the product's process requirements.
3.Place the venue
If the oven is placed on the floor. Consider whether you can enter the door and enter the elevator. In fact, they are all technical issues. The oven is not too technically difficult. Simple structure. It is easy to be imitated. It is better to sign a technical agreement for performance acceptance.
Use and maintenance of industrial ovens
1. Clean the surface and inner cavity for dust and keep the machine clean and hygienic.
2. Check whether the current of the ammeter is the same as normal. If there is something abnormal, notify the maintenance worker for maintenance.
3． Sudden power failure, turn off the heating switch to prevent it from starting automatically when a call comes in.
4． Check whether the fan is running normally and there are no abnormal sounds. If there is any, turn off the machine immediately and notify the maintenance worker for maintenance.
5． Check that the air vents are not blocked and clean up the accumulated dust.
6. Whether the fan is operating normally.
7. The maintenance worker checks whether the current is normal.
8. Check whether the temperature controller is accurate. If not, please adjust the static compensation or sensor correction value of the temperature controller.
9. Check whether the heating tube is damaged and whether the wiring is aging.
10． Check whether the delayer is accurate and whether the error is allowed.