LED双数显智能仪表控温，PID演算，自动控制、恒温，操作简单，控温精准1秒~99.99小时任意设定时间，时间到达后自动停止加热，并蜂鸣报警烘箱坚固耐用，可一天24小时恒温工作可根据实际需求调整内部尺寸、箱体颜色、温度、升温速度、承重量、搁架方式与层数，且未必增加额外费用可升级功能超温保护装置，防止温控失灵持续升温，保障烘烤的物品安全打印温度记录排风口可装配抽风装置电脑查看及打印温度记录或电脑控制机群. The hot air circulation duct is ingeniously designed. The hot air circulation coverage in the oven is high, the material is even and the energy is saved. The LED double digital display intelligent instrument temperature control, PID calculation, automatic control, constant temperature, simple operation, accurate temperature control for 1 second to 99.99 hours. Set the time arbitrarily, automatically stop heating after the time is reached, and buzz the alarm. The oven is sturdy and durable. It can work at a constant temperature 24 hours a day. The internal size, box color, temperature, heating speed, load capacity, shelf method and The number of layers can be upgraded without additional cost. The function of over-temperature protection device can be upgraded to prevent the temperature control from malfunctioning and keep heating up. To ensure the safety of baked items, the temperature record can be printed.
Basic structure of the oven
智能电烤箱内部工作室两侧通风上部运风，一进一出风口对流循环，温控测温处采用K型标 准℃探测空气温度，确保精确。 1. Control structure RKC intelligent electric oven. The upper side of the inner working room of the RKC ventilates the upper part of the air, and the convection cycle of the air inlet and outlet. Constant temperature system, automatic temperature control, and automatically enter the self-tuning optimization state. There are 2 contactors inside the electric box, generally small control fan, large control heating tube, the electric box is convenient to open, please remember to close the electric box door, and Lock it up.
2. External structures include cold-rolled iron, galvanized, and stainless steel plates. Welding is usually used for cold-rolled iron plates. High-temperature rock wool is used for insulation.
3, the internal structure of stainless steel, galvanized, stainless steel plate and other bending welding, usually we use more stainless steel plate.
Use of the oven:
1. The oven should be placed in a dry and horizontal place in the room to prevent vibration and corrosion.
2. Pay attention to the safe use of electricity, and install a sufficient capacity switch blade according to the power consumption of the oven. Use enough power wires and have a good ground wire
3. An oven with an electric contact mercury thermometer type thermostat shall connect the two wires of the electric contact thermometer to the two terminals on the top of the box respectively. Another ordinary mercury thermometer is inserted into the exhaust valve (the thermometer in the exhaust valve is used to calibrate the electrical contact mercury thermometer and the actual temperature in the observation box) to open the hole of the exhaust valve. Adjust the mercury thermometer at the electrical contact to the required temperature and tighten the screws on the steel cap to achieve the purpose of constant temperature. However, care must be taken not to turn the indicator iron outside the scale during adjustment.
4. When all preparations are ready, put the sample in the oven, and then connect and turn on the power. The red indicator light indicates that the oven has been heated. When the temperature reaches the controlled temperature, the red light turns off and the green light turns on, and the constant temperature starts. In order to prevent temperature control from malfunctioning, care must be taken.
5. Care should be taken not to place the samples too densely when placing them in the sample. No test article should be placed on the heat sink to avoid affecting the upward flow of hot air. Baking of flammable, explosive, volatile and corrosive items is prohibited.
6. When you need to observe the samples in the working room, you can open the outer box door and observe through the glass door. However, it is better to open the door as few as possible, so as not to affect the constant temperature. Especially when working above 200 ° C, opening the door of the box may cause the glass door to suddenly cool and break.
7. The blower oven, the blower must be turned on during the heating and constant temperature process, otherwise it will affect the uniformity of the temperature of the working room and damage the heating element. 8. After work is completed, the power should be cut off in time to ensure safety.
8. Keep the inside and outside of the oven clean.
9. When using, do not exceed the operating temperature of the oven
10. In order to prevent burns, special tools should be used when taking and placing the test specimen.