1. Scope of application of UV curing machine:
1. UV bonding of electronic components, wires, coils, etc .;
2. Computer keyboard, silicone keys, plastic shell, etc. after printing and drying;
3. UV ink, coating and other chemical product experiments;
4. Flat curing of UV glue (varnish) for small plastics, hardware, films, panels, etc.
Performance characteristics of UV curing machine:
UV光固机可使印件 表面坚硬 、 亮丽 、 耐划、防水、防火、防潮 、 持久亮丽 、 永不褪色。 This UV light curing machine can make the surface of prints hard , beautiful , scratch-resistant, waterproof, fireproof, moisture-proof , durable and beautiful , and never fade. UV设备 效率高、耗能低、正品率高、操作简便、易于维护保养 。 The UV equipment has high efficiency, low energy consumption, high authenticity rate, simple operation and easy maintenance .
Technical parameters of UV curing machine:
· Machine weight: 125kg
· Total power of lamp: 6KW
· Irradiation distance: 80--200m
· Power density: 80--120W / cm
· Spectrum main peak: 365nm
· Lamp: High-pressure mercury lamp 2 × 3KW (lamp irradiation height can be adjusted manually)
· Cooling system: 5 fans
· Lower exhaust system: 370v 1
· Lamp irradiation width: 500mm
· Tube length: 580mm
· Feeding height: 80mm
· Feeding length: 150mm
· Output length: 150mm
· Transmission motor: 60W 220V 1:30
· Mesh belt material: imported Teflon
· Mesh belt width: 500mm
· Lamp life: 800H
· Power: 380V
· Dimensions: 1505X800X1006mm (L * W * H)
Fourth, UV light solid machine maintenance:
UV Light Fixing Machine Daily Maintenance
1. Clean the surface dust and keep the curing machine body clean.
2. When the UV machine is started, check whether the fan and motor are running normally and there are no abnormal sounds. If there is any problem, immediately shut down the curing machine and notify the maintenance worker for inspection.
3. After the lamp is turned on, check whether the UV lamps are all lit. If any are not lit, notify the maintenance worker for maintenance.
UV Light Fixing Machine Monthly Maintenance
1. Check if the UV light curing machine vent is blocked, and clean up the dust.
2. Check if the UV lamp current is normal and the line is aging.
3. Check whether the UV light-fixing machine fan and motor are operating normally and whether the motor speed can meet the working requirements.
4. Refueling the transmission curing machine chain and sprocket.
5. Whether the light intensity of the UV lamp can still reach the working standard, and whether the lamp is aging.
6. Clean the dust inside the UV machine.
Fifth, half-year maintenance of UV curing machine
1. Check if the UV curing machine circuit and switch are normal.
2. Refueling the UV curing machine motor gearbox.
3. UV curing machine transformer insulation is not less than 5 megohms. If it is not reached, the transformer must be dried again.
4. The UV light solid machine reflector is wiped clean with a soft rag and alcohol.
5. Whether the drive shaft and sprocket of the UV curing machine are loose and whether the two sprocket wheels are vertical.
6. Is the tightness of the UV machine mesh belt appropriate?