365体育开户

Hello, welcome to visit the official website of Dongguan Jiabang Machinery Equipment Co., Ltd.!
Favorite Jiabang | Online Message | Contact Us
Main industrial oven, tunnel oven, double-pull assembly line ...
National Consulting Hotline: 13712718109
Jiabang Product Center
4Products
Your location: Home- > Products- > Industrial Oven
热风循环工业烤箱
Hot air circulation industrial oven <br> Special offer direct hot air circulation industrial oven energy saving industrial electric heating tube drying equipment Dongguan large high temperature double door oven professional precision constant temperature oven Jiabang factory non-standard custom

Hot air circulation industrial oven

Details




Product advantages

First, safety and reliability
1. With multiple protection functions such as studio over-temperature, compressor overload, over-pressure oil pressure protection, fan overload, compressor delay, etc.
2. Adopting international leading refrigeration technology, most parts are imported international first-tier brands with high reliability.
Second, energy saving and low noise
1. Using unique cold balance technology, the product is more energy-saving and greatly reduces the test cost. The parts and pipes in the box are reinforced with sound insulation cotton, which effectively reduces equipment noise and extends service life.
2. Adopting unique pipe bender section, the system has high cleanliness and the product runs more smoothly.
Attention to detail
1. The circuit in the box uses the system number, and the circuit is clear and clear.
2. Sophisticated welding process, the surface of the steel pipe is protected by micro-leakage-resistant transparent paint, which effectively prevents copper pipe from micro-leakage and oxidation.
3. Strict debugging and inspection before the product leaves the factory to ensure that every detail is perfect.
Fourth, innovation and efficiency
Sheet metal is machined and molded using German-imported CNC machine tools, with a fashionable appearance and a more sense of technology. The company pays attention to R & D and innovation, has made breakthrough progress in structural design, freezing process and details. The products are more energy-efficient and have obtained a number of technical patent certificates.

Use of the oven:

1. The oven should be placed in a dry and horizontal place in the room to prevent vibration and corrosion.

2. Pay attention to the safe use of electricity, and install a sufficient capacity switch blade according to the power consumption of the oven. Use enough power wires and have a good ground wire

3. An oven with an electric contact mercury thermometer type thermostat shall connect the two wires of the electric contact thermometer to the two terminals on the top of the box respectively. Another ordinary mercury thermometer is inserted into the exhaust valve (the thermometer in the exhaust valve is used to calibrate the electrical contact mercury thermometer and the actual temperature in the observation box) to open the hole of the exhaust valve. Adjust the mercury thermometer at the electrical contact to the required temperature and tighten the screws on the steel cap to achieve the purpose of constant temperature. However, care must be taken not to turn the indicator iron outside the scale during adjustment.

4. When all preparations are ready, put the sample in the oven, and then connect and turn on the power. The red indicator light indicates that the oven has been heated. When the temperature reaches the controlled temperature, the red light turns off and the green light turns on, and the constant temperature starts. In order to prevent temperature control from malfunctioning, care must be taken.

5. Care should be taken not to place the samples too densely when placing them in the sample. No test article should be placed on the heat sink to avoid affecting the upward flow of hot air. Baking of flammable, explosive, volatile and corrosive items is prohibited.

6. When you need to observe the samples in the working room, you can open the outer box door and observe through the glass door. However, it is better to open the door as few as possible, so as not to affect the constant temperature. Especially when working above 200 ° C, opening the door of the box may cause the glass door to suddenly cool and break.

7. The blower oven, the blower must be turned on during the heating and constant temperature process, otherwise it will affect the uniformity of the temperature of the working room and damage the heating element. 8. After work is completed, the power should be cut off in time to ensure safety.

8. Keep the inside and outside of the oven clean.

9. When using, do not exceed the operating temperature of the oven

10. In order to prevent burns, special tools should be used when taking and placing the test specimen.






HomeAbout JiabangProductsCompany RealityPartnersQualification CertificateNews CenterIndustry InformationOnline MessageContact Us
copyright 技术支持: 东莞网站建设访问量: Dongguan Jiabang Machinery Equipment Co., Ltd. Copyright © copyright Technical Support: Dongguan Website Construction Visits:
Contact: Mr. Lu / 13712718109 Address: No.302 Heluling, Huanzhuli Village, Changping Town, Dongguan, Guangdong Province [ Bmap ] [ Gmap ] [ Background Management ] [ Baidu Statistics ]
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete within 24 hours.
Popular searches: Dongguan industrial ovens, tunnel furnace manufacturers, UV curing furnaces, oil spray water cabinets
  • Back to top
  • Download Mobile APP
    Download Mobile APP