Oven purchase precautions
The production capacity is determined to meet the production requirements and the production capacity is high. You can choose a drying production line, tunnel furnace, and drying tunnel. Low-capacity or experimental small ovens can be customized.
Choose 10 degrees higher than the actual use temperature. According to the process requirements, calculate the actual required temperature difference to ensure the effect of baking. Example: If the use temperature is 160 degrees, 220 degrees, 360 degrees, 440 degrees, the maximum design temperature is 500 degrees. 4 temperatures, if it is the same product. Control is best to use SCR. Different products have slightly larger temperature differences when used at low temperatures. 160 degrees and 220 degrees of actual use, not as good as a low temperature oven. Use a medium-temperature 500-degree oven. The 160-degree baking temperature difference is 2 to 5 degrees higher than a low-temperature 250-degree oven. It depends on the quality of the manufacturers' equipment. The oven is divided into low temperature (0-250 degrees), medium temperature (250-600 degrees), high temperature (600-1500 degrees) exceeding 1200 degrees. The company recommends using carbon-silicon rods for heating, which can be selected according to the process requirements of the product.
How to put the product in. You can layer the oven. Configuration tray, there are net disk, solid disk, punching disk. If there are more, you can use the material rack, the frame. But pay attention to one problem. Whether the operator is convenient to operate. For example: an oven with a height of 1600, a width of 1600, and a depth of 900mm. If you make a baking sheet, put items. It is necessary to consider whether the operator can handle it. The operators in many factories are girls. Height is more than 1550mm. If you want her to lift the 1600 * 900 size baking pan. It's a bit difficult. Not to mention the multiple products to be baked.
4.Place the venue
If the oven is placed on the floor. Consider whether you can enter the door and enter the elevator. In fact, they are all technical issues. The oven is not too technically difficult. Simple structure. It is easy to be imitated. It is better to sign a technical agreement for performance acceptance.
Use and maintenance of industrial oven
1. Clean the surface and inner cavity for dust and keep the machine clean and hygienic.
2. Check whether the current of the ammeter is the same as normal. If there is something abnormal, notify the maintenance worker for maintenance.
3． Sudden power failure, turn off the heating switch to prevent it from starting automatically when a call comes in.
4． Check whether the fan is running normally and there are no abnormal sounds. If there is any, turn off the machine immediately and notify the maintenance worker for maintenance.
5． Check that the air vents are not blocked and clean up the accumulated dust.
6. Whether the fan is operating normally.
7. The maintenance worker checks whether the current is normal.
8. Check whether the temperature controller is accurate. If not, please adjust the static compensation or sensor correction value of the temperature controller.
9. Check whether the heating tube is damaged and whether the wiring is aging.
10． Check whether the delayer is accurate and whether the error is allowed.
Product pictures, prices, and product attributes are for reference only; specific product requirements are subject to customer requirements, and prices are subject to offline quotation plans. All product prices in this shop are not transaction prices and are for reference only! Welcome to inquire or negotiate in the factory!
所有商品我们在发货前有专门质检部门进行严格检查，确保无任何质量问题后，方可发货 Product problems: We have a special quality inspection department to conduct strict inspections before delivery to ensure that there are no quality problems before we can ship
图片均100%实物拍摄，但部分产品由于光线及显示器的原因，您所看到的图片可能存在轻微色差问题。 Product pictures: The pictures are taken 100% in kind, but some products may have slight color difference due to light and display. Welcome to inquire and visit our company!
所有商品规格尺寸均可以根据客户需求定制，所以购买时需要提前联系预定；大件商品部分是没有库存的，如果需要，欢迎来电咨询或来厂洽谈！ Specifications and stocks: All product specifications and sizes can be customized according to customer needs, so you need to contact the reservation in advance when buying; large items are not in stock, if necessary, please call us for consultation or come to the factory to discuss!
1. Strictly follow the relevant national specifications and drawings approved by the buyer to ensure project quality.
2. Ensure that the equipment and accessories provided are the products required by the contract, and there are no fake and shoddy products;
3. Ensure that the construction period is completed on time according to the contract.
4. Ensure that the products produced by the complete set of equipment meet the qualification standards of your company's products.
5. All equipments are guaranteed for 1 year and lifetime maintenance.