Jiabang thank you for coming
+ 线上销售为一体的运营模式，专业生产设计各种电热工业烤箱、高温烤箱、 IR 隧道炉、 PCV 生产线、 Uv 固化炉、喷油水濂柜、自动加油线、整套涂装设备等都可按客户的需要来定制， 如需定制 请 您与 我们联系 13712718109 吕先生 , 确认相关产品精 量及款式型号等，真诚期待与您合作，谢谢！ Our company is based on the operation mode of factory production + online sales, specializing in the production and design of various electric industrial ovens, high temperature ovens, IR tunnel furnaces, PCV production lines, Uv curing furnaces, fuel injection cabinets, automatic refueling lines, complete sets Painting equipment can be customized according to customer's needs. If you need customization , please contact us 13712718109 Mr. Lu to confirm the precision and style of related products .
Electric industrial oven, industrial high temperature oven, industrial small oven
Supply electric industrial oven, industrial high temperature oven, industrial small oven
： 材料可按客户产品需要设计、制作。 ◆ Studio size : materials can be designed and produced according to customer's product needs.
室温+10~300℃,此范围内任意温度可调。 ◆ Temperature range: room temperature + 10 ~ 300 ℃, any temperature can be adjusted within this range.
采用1.2mm厚度A3冷压碳钢板制作。 ◆ Exterior wall material: 1.2mm thick A3 cold-pressed carbon steel plate.
外墙采用环保自干漆（锤纹漆），颜色为银灰色。 ◆ Coating material: The exterior wall adopts environmentally friendly self-drying paint (hammer paint), and the color is silver gray.
高效硅酸铝纤维隔热层,保温性能好。 ◆ Insulation material: high-efficiency aluminum silicate fiber insulation layer, good insulation performance.
埋入式凹槽两条，采用12#槽钢加固，方便小车进出。 ◆ Bottom material: two embedded grooves, reinforced with 12 # channel steel, which is convenient for the car to enter and exit.
一个CHENGNENG7412P ID智能温控仪表，自动恒温控温，精度±2℃。 ◆ Temperature control device: a CHENGNENG7412P ID intelligent temperature control instrument, automatic constant temperature control, accuracy ± 2 ℃.
1100W/380V浙江腾龙电机股份有限公司出品。 ◆ Motor power: 1100W / 380V produced by Zhejiang Tenglong Motor Co., Ltd.
数量1个，口径60毫米。 ◆ Air intake system: 1 quantity, caliber 60 mm.
数量1个，口径100毫米。 ◆ Exhaust system: 1 quantity, caliber 100 mm. Can be installed to take over outside the workshop.
一支不锈钢铠甲PT100铂电阻温度传感装置，测温精确。 ◆ Temperature measuring device: a stainless steel armored PT100 platinum resistance temperature sensing device, accurate temperature measurement.
远红外不锈钢管状电加热器，安装于箱体两侧风道内 ◆ Heating element: Far-infrared stainless steel tubular electric heater, installed in the air duct on both sides of the box
APT/AD16型声光报警，恒温时间结束报警提示，可开关。 ◆ Alarm device: APT / AD16 type audible and visual alarm, alarm prompt at the end of constant temperature time, can be switched on and off.
380V/50HZ三相四线。 ◆ Current and voltage: 380V / 50HZ three-phase four-wire.
全部采用浙江正泰。 ◆ Electrical components: Zhejiang Zhengtai.
◆ Layered according to customer requirements, using angle steel wire mesh to make mesh plate or stainless steel baking plate.
◆ The company specializes in customizing various industrial use ovens (oven, drying box, drying box). The size of the studio can be produced according to customer requirements.
Notice to customers
Product pictures, prices, and product attributes are for reference only; specific product requirements are subject to customer requirements, and prices are subject to offline quotation plans. All product prices in this shop are not transaction prices and are for reference only! Welcome to inquire or negotiate in the factory!
所有商品我们在发货前有专门质检部门进行严格检查，确保无任何质量问题后，方可发货 Product problems: We have a special quality inspection department to strictly check all goods before delivery, and ensure that there are no quality problems before we can ship
Product pictures: The pictures are taken 100% in kind, but some products may have slight color difference due to light and display. Welcome to inquire, you can visit our company!
所有商品规格尺寸均可以根据客户需求定制，所以购买时需要提前联系预定；大件商品部分是没有库存的，如果需要，欢迎来电咨询或来厂洽谈！ Specification inventory: All product specifications and dimensions can be customized according to customer needs, so you need to contact the reservation in advance when purchasing; large parts are not in stock, if necessary, please call us for consultation or come to the factory to discuss!
Use of the oven:
1. The oven should be placed in a dry and horizontal place in the room to prevent vibration and corrosion;
2. Pay attention to the safe use of electricity, and install a sufficient capacity switch blade according to the power consumption of the oven. Use enough power wires and have a good ground wire;
3. The oven with an electric contact mercury thermometer type thermostat should connect the two wires of the electric contact thermometer to the two terminals on the top of the box. Another ordinary mercury thermometer is inserted into the exhaust valve. (The thermometer in the exhaust valve is used to calibrate the electrical contact mercury thermometer and the actual temperature in the observation box.) Open the hole of the exhaust valve. Adjust the mercury thermometer at the electrical contact to the required temperature and tighten the screws on the steel cap to achieve the purpose of constant temperature. But you must pay attention not to rotate the indicator iron outside the scale when adjusting;
4. When all preparations are ready, put the sample in the oven, and then connect and turn on the power. The red indicator light indicates that the box has been heated. When the temperature reaches the controlled temperature, the red light turns off and the green light turns on, and the constant temperature starts. In order to prevent temperature control failure, you must also take care;
5. When placing the samples, pay attention not to arrange them too densely. No test article should be placed on the heat sink to avoid affecting the upward flow of hot air. Baking of flammable, explosive, volatile and corrosive items is prohibited;
6. When you need to observe the samples in the working room, you can open the outer box door and observe through the glass door. However, it is better to open the door as few as possible, so as not to affect the constant temperature. Especially when working above 200 ℃, opening the door of the box may cause the glass door to suddenly cool and break;
7. In the drying oven with blower, the blower must be turned on during the process of heating and constant temperature, otherwise it will affect the uniformity of the temperature of the working room and damage the heating element. 8. After work is completed, the power should be cut off in time to ensure safety;
8. Keep the inside and outside of the oven clean;
9. During use, the temperature should not exceed the operating temperature of the oven;
10. In order to prevent burns, special tools should be used when taking and placing the test samples.