Jiabang thank you for coming
13712718109 吕先生 ,确认相关产品精量及款式型号等，真诚期待与您合作，谢谢！ Our company is based on the operation mode of factory production + online sales, specializing in the production and design of various electric industrial ovens, high temperature ovens, IR tunnel furnaces, PCV production lines, Uv curing furnaces, injection water cabinets, automatic refueling lines, complete sets Painting equipment can be customized according to customer's needs. If you need customization, please contact us 13712718109 Mr. Lu to confirm the precision and style of related products. We sincerely look forward to working with you, thank you!
Use of the oven:
1. The oven should be placed in a dry and horizontal place in the room to prevent vibration and corrosion;
2. Pay attention to the safe use of electricity, and install a sufficient capacity power switch blade according to the power consumption of the oven. Use enough power wires and have a good ground wire;
3. An oven with an electric contact mercury thermometer type thermostat should connect the two wires of the electric contact thermometer to the two terminals on the top of the box. Another ordinary mercury thermometer is inserted into the exhaust valve (the thermometer in the exhaust valve is used to calibrate the electrical contact mercury thermometer and the actual temperature in the observation box) to open the hole of the exhaust valve. Adjust the mercury thermometer at the electrical contact to the required temperature and tighten the screws on the steel cap to achieve the purpose of constant temperature. But you must pay attention not to rotate the indicator iron outside the scale when adjusting;
4. When all preparations are ready, put the sample in the oven, then connect and turn on the power. The red indicator light indicates that the box has been heated. When the temperature reaches the controlled temperature, the red light turns off and the green light turns on, and the constant temperature starts. In order to prevent temperature control failure, you must also take care;
5. When placing the samples, pay attention not to arrange them too densely. No test article should be placed on the heat sink to avoid affecting the upward flow of hot air. Baking of flammable, explosive, volatile and corrosive items is prohibited;
6. When you need to observe the samples in the working room, you can open the outer box door and observe through the glass door. However, it is better to open the door as few as possible, so as not to affect the constant temperature. Especially when working above 200 ° C, opening the door of the box may cause the glass door to suddenly cool and crack;
7. The blower oven must be turned on during heating and constant temperature, otherwise it will affect the uniformity of the temperature of the working room and damage the heating element. 8. After work is completed, the power should be cut off in time to ensure safety;
8. Keep the inside and outside of the oven clean;
9. During use, the temperature should not exceed the operating temperature of the oven;
10. In order to prevent burns, special tools should be used when taking and placing the test samples.
Choose the right drying equipment
的热源主要来自于自燃烧装置，由于说的这一款主要是采用顺流式加热方式，所以需要烘干的物料，都是从进料箱，进料溜进筒体，物料就会被螺旋抄板推向后。 The heat source of the industrial drying equipment mainly comes from the self-combustion device. Since this model mainly uses the co-current heating method, the materials that need to be dried are all fed from the feed box, the feed slips into the barrel, and the material Will be pushed backward by the spiral copyboard. If the drying equipment is tilted and rotated, the material will flow to the back end under the effect of gravity and rotation, and the other side will be picked up again by the baffle, which will be continuously scattered after being brought to the upper end, so that the material forms a uniform curtain in the cylinder It is in thermal contact with the hot air flow in the cylinder. Because the material is repeatedly raised and scattered, the moisture contained in it is gradually dried, so that the purpose of drying can be achieved. Here are some points to choose industrial drying equipment, I hope everyone pays more attention when buying.
First, when choosing industrial drying equipment, you should make a drying experiment about the material in the early stage, and thoroughly understand the drying device used, so that you can really choose the model that suits you.
Second, you can choose a simple structure, high reliability, and each supply item should be sufficient. If you want to make it dry and use longer, you must clean it regularly.
Third, the drying equipment must be suitable for its basic materials as well as specific materials. Of course, it also needs to be able to efficiently process materials and meet the requirements of processing capacity, dehydration capacity, product quality, and so on.
Fourth, you can choose drying equipment with low operating costs and low energy consumption. Including maintenance costs, cost costs, labor costs, spare parts and more.
Fifth, the most important thing is to meet environmental protection requirements, high safety and high drying efficiency.