: 该系列烤箱使用方便，设备实用且功能性强，价格合理。 Industrial oven : This series of ovens are easy to use, practical and functional, and reasonably priced. Other temperature control products such as ovens, tunnel furnaces, rapid high-temperature shocks, and high-temperature aging ovens can be customized according to customer requirements.
The oven is suitable for most industrial applications: heating, degassing, baking, polymerization, preheating, curing, drying, tempering, stability experiments, vulcanization, testing, and more.
All industrial ovens have a strong ventilation effect to ensure temperature accuracy and uniformity.
： Operating environment :
Precise temperature design, because of different production processes, the maximum temperature during molding can be selected from 200 ℃ or 300 ℃. Temperature floating value: less than ± 0.2 ℃. Spatial change of temperature: less than ± 1.2 ° C at 105 degrees and less than ± 2.5 ° C at 200 degrees (test method, according to EU international NFC15-140 standard, use 9 sensors to test different points for two hours.)
The volume of 8 different sizes of ovens from 125 to 2520 liters. Except for the control panels of the ovens XL0686, XL1400, XL1800, XL2520, which are placed on the left hand side, the control panels of other ovens are placed on the top of the oven. In order to reduce the size of the oven and optimize the structure of the oven. The liner is made of high-quality stainless steel with strong corrosion resistance, and the interior is polished. The shell is made of cold-rolled steel plate and baked with epoxy resin. (The color is light gray RAL7035) The liner and the shell do not have any contact, and the high-quality thermal insulation layer effectively reduces heat loss. The outer box and inner tank are separated by rock wool, and the insulation layer is up to 110 mm thick, which ensures effective heat control, low external temperature and excellent thermal insulation. The insulation materials and gaskets do not contain asbestos. The door opens on the right, and the door is closed by a two-point latch.
: Air circulation of internal fan :
The oven is a forced circulation mode of the fan. The high-speed airflow speeds up the drying speed and speeds up the temperature distribution in the oven. The centrifugal blower is installed on the top of the oven and is separated from the working room by a stainless steel baffle. Air enters the fan from the top to the center of the oven, passes through the temperature sensor and the wrapped heating element. The heated air is distributed on the top of the oven and recirculated by a fan. Air circulation cannot be stopped, but a transmission can be installed for Adjust the speed of air circulation.
: Exhaust gas removal, fresh air supply :
Before entering the cavity, the air is preheated through a vent hole to set an exhaust port with a diameter of 60, 80 or 100 mm (selectable in the sample), and the discharge is controlled by an adjustable valve. An exhaust fan can be added as an option to accelerate exhaust emissions. An anti-dust air filter can also be added.
Temperature control and safety:
The temperature sensor is a J-type thermocouple. The temperature is controlled by a precise microprocessor chip processor, which maintains a high degree of accuracy and prevents the temperature setting from being exceeded. An independent thermostat can adjust the upper limit of over-temperature protection, which provides 2.1 level protection for the setting. Automatic tuning PID digital controller, digital display setting and actual temperature value, and heating indicator. There are switch buttons on the control panel. When the fault indicator is on, the safety protection device starts to work.