Precision industrial oven features:
1. High-precision temperature controller provides accurate and stable constant temperature conditions to facilitate testing or drying.
2. Liquid-expandable over-temperature power-off protection device to ensure the safety of test items.
3. With adjustable inlet and exhaust ports, you can choose to adjust the size or switch according to different test conditions.
4. Timing device, LED digital type, constant timing, providing complete design of use conditions.
5.Alarm device, when the over-temperature protection is activated, the alarm will be notified, and the machine will stop automatically when the timing is completed.
Air supply method:
Axial-flow wind wheel forcibly circulates the air, and returns air to the left and right to ensure uniform temperature, and it will not cause direct high-temperature injury to the human body when the door is opened
Technical parameters of precision industrial oven:
1. Temperature range: RT + 10 ℃ ～ 300 ℃
2. Temperature resolution: 1.0
3. Temperature fluctuation: ± 2.0 ℃
4. Temperature distribution average: ± 2.0% ℃ (tested after no-load constant temperature 30M)
5. Inner box size: 1000 * 1000 * 1000MM (W * H * D)
6. Heating time (referring to no-load): RT ～ 300 ℃ takes about 40min
7. Control mode: PID automatic adjustment output
Structure and configuration of precision industrial oven:
1. Inner box material: 304 stainless steel
2. Outer box material: special steel plate, galvanized anti-rust treatment, high-grade wear-resistant resin paint
3. Insulation material: aluminum silicate glass wool
4. Heater material: stainless steel electric heating wire
5.Time control: 0 ～ 999H / M / S can be adjusted at will.
6. Temperature measuring body: K type thermocouple
7. Urgency: Tie Fei Long
原装台湾进口微电脑自动演算控制器 Temperature controller: original Taiwan imported microcomputer automatic calculation controller
1, 72 / 72MM single specification
2.Multiple input signals can be selected at will, including PT-100
3.Two sets of alarm settings, each group has 22 modes to choose from
4, with automatic and manual adjustment function
5.When the signal is disconnected, OPEN will be displayed automatically
6.Adopt conversational design, can save the trouble of checking the table
7, with work lock
8.Choose Celsius or Fahrenheit
9.The parameter value can be increased and reversed.
10.Can choose dual group output and dual group alarm
11.Optional retransmission function
12.Optional RS485 function and slave-master function
13.With timer function
14, 2 groups of 8 segments each, can be strung into 1 group of 16 segments
15, 6 groups of PID calculations, applicable to various environments
Description of precision industrial oven:
1.Power: AC85 ~ 260V, 50 / 60HZ
2.Input: K, J, PT, R, S, N, T, E, B, DC Linear ...
3.Output: RELAY (250V / 5A), DC24V, DC Linear ...
4.Control method: PID.ON / OFF
5.Proportional band: 0% ~ 200% full scale
6.Proportional period: 0 ~ 100 seconds
7.Accuracy: 0.3% full scale
8.Ambient temperature and humidity: Humidity is below 90%, and normal temperature is between minus 10 degrees and 55 degrees
9, wet power consumption: less than 5VA
10.Input impedance: 20M ohm 500V DC
11.Upper / lower limit alarm: 22 modes
Over temperature protector
2. Motor overload protector
5. No fuse protection switch
Equipment external accessories:
1.2.5m power cord
2. One spare fuse
3.One wind motor