Hello, welcome to the official website of Dongguan Jiabang Machinery Equipment Co., Ltd.!
Favorite Jiabang | Online Message | Contact Us
Main industrial oven, tunnel oven, double-pull assembly line ...
National Consulting Hotline: 13712718109
Jiabang Product Center
Your location: Home- > Products- > Industrial Oven
Explosion-proof precision hot air circulation oven <br> Dongguan manufacturers directly supply explosion-proof precision hot air circulation oven large industrial oven constant temperature dryer Jiabang Machinery non-standard custom

Explosion-proof precision hot air circulation oven


Jiabang thank you for coming

13712718109 吕先生 ,确认相关产品精量及款式型号等,真诚期待与您合作,谢谢! Our company is based on the operation mode of factory production + online sales, specializing in the production and design of various electric industrial ovens, high temperature ovens, IR tunnel furnaces, PCV production lines, Uv curing furnaces, injection water cabinets, automatic oiling lines, complete sets Painting equipment can be customized according to customer's needs. If you need customization, please contact us 13712718109 Mr. Lu to confirm the precision and style of related products. We sincerely look forward to working with you, thank you!

First, the structure of the box

、内尺寸:2000(W)× 2000(H)×1000(D)mm; 1. Internal dimensions: 2000 (W) × 2000 (H) × 1000 (D) mm;

、外尺寸:2250(W)× 2380(H)×1160(D)mm以实物为标准 2. Outer dimension: 2250 (W) × 2380 (H) × 1160 (D) mm

、控制器位于机台测面,双门开启; 3. The controller is located on the measuring surface of the machine, and the double doors are opened;

、内材质为不锈钢板:厚1.2mm; 4. The inner material is stainless steel plate: 1.2mm thick;

、外材质为SECC钢板厚≥1.5mm粉体烤漆处理; 5. The outer material is powder baking paint treatment of SECC steel plate thickness ≥1.5mm;

、保温材质为进口岩绵,保温效果好; 6. The insulation material is imported rock wool, and the insulation effect is good;

、防密之迫紧材质为Silicom; 8. The material of the tightness to prevent secrets is Silicom;

、有脚轮及固定脚,内为空箱; 8. There are casters and fixed feet, the inside is an empty box;

Second, the temperature control system

、温度控制为PID微电脑,可自动演算,PV/SV同时显示,按键设定,可设定常温到最高温度之间的任意温度值;(台湾泛达) 1. The temperature control is a PID microcomputer, which can automatically calculate, PV / SV is displayed at the same time, and the button is set to set any temperature between normal temperature and the highest temperature;

、感温入力CA(K); 2. Temperature sensing force CA (K);

、输出为12V; 3 , the output is 12V;

、电流控制器为SSR无接点RELAY; 4. The current controller is SSR contactless RELAY;

、发热材质为蜂窝式加热器(高温丝); 5. The heating material is a honeycomb heater (high temperature wire);

、温度范围RT~300℃; 6. Temperature range RT ~ 300 ℃;

Third, precision

、控制精度±1℃; 1. Control accuracy ± 1 ℃;

、箱内温度分布均匀度±4.0℃; 2. Uniformity of temperature distribution in the box ± 4.0 ℃;

Fourth, the heating rate

、RT-100℃约12分钟 1 、 RT-100 ℃ for about 12 minutes

V. Air Supply System

、强制水平送风循环; 1. Forced horizontal air circulation;

、马达为长轴心耐温专用型(两组),马率2HP / 50Hz; 2. The motor is a special type with long axis temperature resistance (two groups), the horsepower rate is 2HP / 50Hz;

、风扇为多叶式涡轮型; 3. The fan is a multi-blade turbine type;

6. Power supply unit

Voltage 380V three-phase

Current 32A

Power 22KW

Seven, accessories

、过载保护装置 1.Overload protection device

、定时器99.9秒-999时(可选择设定小时、分钟、秒) 2. Timer 99.9 seconds-999 hours (optionally set hours, minutes, seconds)

a continuous use

b. Time to time, time to cut off heating current (alarm device)

Eighth, security protection system

1,   High temperature protection system: When the temperature is out of control due to external forces, the system will automatically stop the power supply of the whole machine when the temperature exceeds 10 degrees, thereby protecting the safety of your products and machines;

2,   Overcurrent protection system: When the power of the whole machine exceeds the normal power due to excessively high applied voltage or other reasons, this system will automatically power off to protect the industrial control components of the whole machine from being damaged.

Features Brief Introduction

1. The outside is treated with SECC steel plate and fine powder baking paint, and the inside is made of SUS mirror stainless steel;

2. New high temperature resistant long shaft motor;

3. Vortex fan

4. Silicone Packing (Silicon Packing);

5. Over-temperature protection: automatic power-off system for overload;

6. Circulation mode: forced horizontal air circulation;

7. Heating method: PID + SSR;

8. Temperature range; room degree + -10 degrees-300 degrees arbitrarily adjustable;

Use of the oven:

1. The oven should be placed in a dry and horizontal place in the room to prevent vibration and corrosion;

2. Pay attention to the safe use of electricity, and install a sufficient capacity switch blade according to the power consumption of the oven. Use enough power wires and have a good ground wire;

3. The oven with an electric contact mercury thermometer type thermostat should connect the two wires of the electric contact thermometer to the two terminals on the top of the box. Another ordinary mercury thermometer is inserted into the exhaust valve. (The thermometer in the exhaust valve is used to calibrate the electrical contact mercury thermometer and the actual temperature in the observation box.) Open the hole of the exhaust valve. Adjust the mercury thermometer at the electrical contact to the required temperature and tighten the screws on the steel cap to achieve the purpose of constant temperature. But you must pay attention not to rotate the indicator iron outside the scale when adjusting;

4. When all preparations are ready, put the sample in the oven, and then connect and turn on the power. The red indicator light indicates that the box has been heated. When the temperature reaches the controlled temperature, the red light turns off and the green light turns on, and the constant temperature starts. In order to prevent temperature control failure, you must also take care;

5. When placing the samples, pay attention not to arrange them too densely. No test article should be placed on the heat sink to avoid affecting the upward flow of hot air. Baking of flammable, explosive, volatile and corrosive items is prohibited;

6. When you need to observe the samples in the working room, you can open the outer box door and observe through the glass door. However, it is better to open the door as few as possible, so as not to affect the constant temperature. Especially when working above 200 ℃, opening the door of the box may cause the glass door to suddenly cool and break;

7. In the drying oven with blower, the blower must be turned on during the process of heating and constant temperature, otherwise it will affect the uniformity of the temperature of the working room and damage the heating element. 8. After work is completed, the power should be cut off in time to ensure safety;

8. Keep the inside and outside of the oven clean;

9. During use, the temperature should not exceed the operating temperature of the oven;

10. In order to prevent burns, special tools should be used when taking and placing the test samples.

HomeAbout JiabangProductsCompany RealityPartnersQualification CertificateNews CenterIndustry NewsOnline MessageContact Us
copyright 技术支持: 东莞网站建设访问量: Dongguan Jiabang Machinery Equipment Co., Ltd. Copyright © copyright Technical Support: Dongguan Website Construction Visits:
Contact: Mr. Lu / 13712718109 Address: 302 Heluling, Huanzhuli Village, Changping Town, Dongguan, Guangdong Province [ Bmap ] [ Gmap ] [ Background Management ] [ Baidu Statistics ]
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours.
Popular searches: Dongguan industrial ovens, tunnel furnace manufacturers, UV curing furnaces, oil spray water cabinets
  • Back to top
  • Download Mobile APP
    Download Mobile APP