Jiabang thank you for coming
13712718109 吕先生 ,确认相关产品精量及款式型号等，真诚期待与您合作，谢谢！ Our company is based on the operation mode of factory production + online sales, specializing in the production and design of various electric industrial ovens, high temperature ovens, IR tunnel furnaces, PCV production lines, Uv curing furnaces, injection water cabinets, automatic oiling lines, complete sets Painting equipment can be customized according to customer's needs. If you need customization, please contact us 13712718109 Mr. Lu to confirm the precision and style of related products.
Features of Precision Industrial Oven
1. High-precision temperature controller provides accurate and stable constant temperature conditions to facilitate testing or drying.
2. Liquid-expandable over-temperature power-off protection device to ensure the safety of test items.
3. With adjustable inlet and exhaust ports, you can choose to adjust the size or switch according to different test conditions.
4, timing device, LED digital, constant timing, providing a complete design of the use conditions.
5, alarm device, when the over-temperature protection is activated, it will notify the alarm, and automatically stop when the timing is completed.
Air supply method
Axial-flow wind wheel forcibly circulates the air, and returns air to the left and right to ensure uniform temperature, and it will not cause direct high-temperature injury to the human body when the door is opened
Technical parameters of precision industrial oven
1. Temperature range: RT + 10 ℃ ～ 300 ℃
2. Temperature resolution: 1.0
3. Temperature fluctuation: ± 2.0 ℃
4. Average temperature distribution: ± 2.0% ℃ (tested after 30M at no-load constant temperature)
可定制 5. Inner box size: 1200 * 800 * 680MM (W * H * D) can be customized
6, heating time (referring to no-load): RT ~ 300 ℃ takes about 40min
7. Control method: PID automatic adjustment output
Structure and configuration of precision industrial oven
1. Inner box material: 304 stainless steel
2. Outer box material: special steel plate, galvanized anti-rust treatment, high-grade wear-resistant resin baking paint
3. Thermal insulation material: aluminum silicate glass wool
4. Material of heater: stainless steel electric heating wire
5.Time control: 0 ～ 999H / M / S can be adjusted at will.
6. Temperature measuring body: K type thermocouple
7. Urgency: Tie Fei Long
Notice to customers
Product pictures, prices, and product attributes are for reference only; specific product requirements are subject to customer requirements, and prices are subject to offline quotation plans. All product prices in this shop are not transaction prices and are for reference only! Welcome to inquire or negotiate in the factory!
Product problems: We have a special quality inspection department to strictly check all goods before delivery, and ensure that there are no quality problems before we can ship
Product pictures: The pictures are taken 100% in kind, but some products may have slight color difference due to light and display. Welcome to inquire, you can visit our company!
Specification inventory: All product specifications and dimensions can be customized according to customer needs, so you need to contact the reservation in advance when purchasing; large parts are not in stock, if necessary, please call us for consultation or come to the factory to discuss!
Use of the oven
1. The oven should be placed in a dry and horizontal place in the room to prevent vibration and corrosion;
2. Pay attention to the safe use of electricity, and install a sufficient capacity switch blade according to the power consumption of the oven. Use enough power wires and have a good ground wire;
3. The oven with an electric contact mercury thermometer type thermostat should connect the two wires of the electric contact thermometer to the two terminals on the top of the box. Another ordinary mercury thermometer is inserted into the exhaust valve (the thermometer in the exhaust valve is used to calibrate the electrical contact mercury thermometer and the actual temperature in the observation box) to open the hole of the exhaust valve. Adjust the mercury thermometer at the electrical contact to the required temperature and tighten the screws on the steel cap to achieve the purpose of constant temperature. But you must pay attention not to rotate the indicator iron outside the scale when adjusting;
4. When all preparations are ready, put the sample in the oven, and then connect and turn on the power. The red indicator light indicates that the box has been heated. When the temperature reaches the controlled temperature, the red light turns off and the green light turns on, and the constant temperature starts. In order to prevent temperature control failure, you must also take care;
5. When placing the samples, pay attention not to arrange them too densely. No test article should be placed on the heat sink to avoid affecting the upward flow of hot air. Baking of flammable, explosive, volatile and corrosive items is prohibited;
6. When you need to observe the samples in the working room, you can open the outer box door and observe through the glass door. However, it is better to open the door as few as possible, so as not to affect the constant temperature. Especially when working above 200 ℃, opening the door of the box may cause the glass door to suddenly cool and break;
7. In the drying oven with blower, the blower must be turned on during the process of heating and constant temperature, otherwise it will affect the uniformity of the temperature of the working room and damage the heating element. 8. After work is completed, the power should be cut off in time to ensure safety;
8. Keep the inside and outside of the oven clean;
9. During use, the temperature should not exceed the operating temperature of the oven;
10. In order to prevent burns, special tools should be used when taking and placing the test samples.