无尘烤箱 Equipment Name: Dustless Oven
机台上方 Location of electrical control box: above the machine
RT~250℃ Design temperature range: RT ~ 250 ℃
380V/50HZ Use voltage: 380V / 50HZ
RT+20~250℃ Working temperature: RT + 20 ~ 250 ℃
7KW Heating power: 7KW
±1℃/1℃ Temperature control accuracy / resolution: ± 1 ℃ / 1 ℃
100℃以下±2℃, 100℃以上±3℃, Temperature uniformity: below 100 ℃ ± 2 ℃, above 100 ℃ ± 3 ℃,
可根据客户要求订做各种规格 Specifications: Various specifications can be customized according to customer requirements
(600*650*600) （宽*高*深）单位：mm Internal dimensions of the device: (600 * 650 * 600) (W * H * D) Unit: mm
900*1400*800以实物为标准 （宽*高*深）单位：mm External dimensions of the device: 900 * 1400 * 800 with the physical object as the standard (width * height * depth) Unit: mm
（设备使用Q235材质均经过防锈处理。） I. Equipment making materials and methods (The equipment uses Q235 material and has undergone anti-rust treatment.)
箱体、风道、进气、排气、过滤系统、发热元件、循环风机、电控系统等 1. Equipment components: box, air duct, air intake, exhaust, filtration system, heating element, circulation fan, electrical control system, etc.
Q235冷钢板厚度1.5mm，钣金折弯、铆钉、电焊及二氧保护焊、拼接而成。 2. Equipment shell material: Q235 cold steel plate thickness 1.5mm, sheet metal bending, rivet, electric welding and oxygen protection welding, splicing. The shell adopts a circular arc design, which has a beautiful texture.
#角钢~槽钢焊接而成。 3 、 Equipment frame: #angle steel ~ channel steel welded.
优质SUS304不锈钢板厚度1.0，钣金折弯、铆钉、螺丝、氩弧焊，拼接满焊而成。 4, equipment liner material: high-quality SUS304 stainless steel plate thickness of 1.0, sheet metal bending, rivets, screws, argon arc welding, splicing full welding.
优质SUS304不锈钢板厚度1.0，钣金折弯、铆钉、螺丝、氩弧焊，拼接而成。 5. Equipment air duct material: high-quality SUS304 stainless steel plate thickness of 1.0, sheet metal bending, rivets, screws, argon arc welding, splicing.
采用4#角钢焊接而成 6. Internal frame of equipment: welded by 4 # angle steel
采用4#角钢焊接而成 7. The bottom frame of the equipment: welded by 4 # angle steel
定位调整脚及承重移动轮 8. Equipment support feet: positioning adjustment feet and load-bearing moving wheels
Dust-free filtering system
1000级 1. Dust-free level: Class 1000
耐高温高效不鏽鋼HEPA過濾網99.97%效率 一组， 2, high-efficiency filter material: high temperature and high efficiency stainless steel HEPA filter 99.97% efficiency
不鏽鋼初效HEPA過濾網95%效率一组。 3. Primary effect filter material: Stainless steel initial effect HEPA filter with 95% efficiency.
Third, equipment insulation materials and related standards
100K级高密度超细硅酸铝玻璃纤维，耐温850℃。 1. Insulation material: 100K high-density ultra-fine aluminum silicate glass fiber, with a temperature resistance of 850 ° C.
各部位按照炉外温升及节能考虑设计厚度80mm。 2. Thermal insulation thickness: Each part is designed with a thickness of 80mm according to the temperature rise outside the furnace and energy saving considerations.
导热系数为0.0048 ∧m/℃ 3. Thermal conductivity: Thermal conductivity is 0.0048 ∧m / ℃
按JB5220-91行业保证，工作温度不超过200℃的干燥箱，表面温度不大于室温加25℃.实际表面温度为室温+15℃，门缝边除外。 4. Surface temperature rise: According to the JB5220-91 industry guarantee, the drying temperature of the drying box does not exceed 200 ℃, the surface temperature is not more than room temperature plus 25 ℃. The actual surface temperature is room temperature + 15 ℃, except for the door seam.
Fourth, coating treatment methods and materials, colors
设备都经过抛光、防锈处理。 1. Processing method: The equipment has been polished and anti-rusted.
都使用符合国家规定环保涂装材料 2. Coating materials: all use environmentally friendly coating materials that comply with national regulations
建议使用电脑白，如有特殊需要请提供色卡编号或颜色。 3. Coating materials: Computer white is recommended. If you have special needs, please provide the color card number or color.
V. Equipment door structure and manufacturing method
单开门 1. Door opening structure: single door opening
自右至左开启 2. Door opening method: open from right to left
Six, production methods
1. The door lock adopts chrome-plated door lock with chrome-coated surface.
2. There are two sets of door hinges, the surface is chrome-plated.
3. Door panel and door frame: Q235 ￡ 1.5m cold steel plate is made by anti-rust treatment.
4. Door bottom: high-quality stainless steel plate bending, splicing, welding, polishing.
5. Internal skeleton of the door: Q235 ￡ channel steel, angle steel, square pipe and other section steel are welded after antirust
6, door insulation: high density and high quality aluminum silicate cotton insulation and mineral wool insulation board filling.
7, food festival environmentally friendly silicone rubber around the pressure seal.
Location of intake and exhaust systems
圆形孔径89mm，位于设备背面加初效新风过滤器。 1. Air inlet: 89mm circular aperture, located on the back of the device plus an initial fresh air filter.
1个孔径89mm,位于设备背面。 2. Exhaust port: 1 hole 89mm, located on the back of the device. (Adjustable circulating emissions)
Eight, circulation system
1.Air supply mode: special forced horizontal shunt circulation air supply.
Fan power: 370W * 3 phase 380V / 50HZ
3. Wind wheel size: 9 "
4. Material of wind wheel: stainless steel wind wheel
Nine, heating system and heating time
采用覆套式无尘化峰窝式热发生器，增大散热面积，主加热元件功率6KW 。 1. Heating element: Cover-type dust-free peak-and-socket type heat generator is used to increase the heat dissipation area. The power of the main heating element is 6KW. Continuous service life can reach more than 20,000 hours. Unique safety type surface with low load heating, with anti-oxidation, stable performance, etc.
位于设备顶部 2.Installation position: located on the top of the device
常温~100度，在15~20分种左右（空载测试） 3. Heating time: normal temperature to 100 degrees, about 15 to 20 minutes (no-load test)
分层隔板: 配置2层活动式不锈钢隔板，多配费用另计。 X. Studio configuration: layered partitions: 2 layers of movable stainless steel partitions, additional costs will be added.
（客户可指定控制电器品牌，价格另议）控制电压:380V Eleven, electrical equipment configuration: (customers can specify the control electrical brand, the price is negotiable) Control voltage: 380V
温度控制器 Twelve, temperature controller
1. Main control: Adopt Yudian LED / intelligent / dual digital display / temperature controller, control accuracy ± 1 ℃, with PID self-adjusting adjustment, automatic constant temperature.
一支不锈钢K型温度传感装置，测温精确±1%FS。 2. Temperature measuring device: A stainless steel K-type temperature sensing device, accurate temperature measurement ± 1% FS.
HS48S-99.99定时装置，可人工/自动开关，当温度到达所设定温度 3. Time setting device: HS48S-99.99 timing device, which can be switched manually / automatically, when the temperature reaches the set temperature
The timer starts immediately, and the heating power is cut off when the time reaches the set range.
APT/AD16型声光报警装置，设定时间恒温结束报警提示。 4, sound and light alarm device: APT / AD16 type sound and light alarm device, set the time constant temperature end alarm prompt.
采用红波按扭式开关,操作方便,简单. 5.Switch and indicator light: The red wave push-button switch is used for easy and simple operation.
带漏电保护的断路器启动，有效保护所有电器元件。 6. Circuit breaker start: The circuit breaker with leakage protection is activated, which effectively protects all electrical components.
SSR模块控制输出实现精细PID调节控温。 7. Load output: The SSR module control output realizes fine PID adjustment and temperature control. 电流瞬间冲击大，控制波动大等影响，可使输出电压平稳线性变化,根据温度的误差大小自动调整输出功率大小，使得设备内部温度更稳定，性能更卓越。）+PID温控仪实现精细控温. (It covers the effects of large instantaneous current impact and large control fluctuations caused by the traditional zero-crossing trigger , which can smoothly and linearly change the output voltage, and automatically adjust the output power according to the temperature error, making the internal temperature of the device more stable and the performance better. .) + PID temperature controller to achieve fine temperature control.
采用（正泰牌用寿命最长的接触器,电气寿命250万次,机械寿命2500万次）。 8. Contactor: Use (the longest-life contactor for Zhengtai brand, with an electrical life of 2.5 million times and a mechanical life of 25 million times).
符合消防之规范. 9.Secondary mechanical protection: in line with fire protection regulations.
过载保护,过流保护,缺相保护,相序保护,超温保护等 10.Other protection: overload protection, over current protection, phase loss protection, phase sequence protection, over temperature protection, etc.