Jiabang thank you for coming
Our company can process and customize various electric heating industrial ovens, high temperature ovens, IR tunnel ovens, Uv curing ovens, PVC production lines, oil injection water cabinets, automatic oil injection lines, and complete coating equipment according to your requirements.
Welcome to inquire: 13712718109 Mr. Lu
Company mailbox: email@example.com
Company Website: https: //jbjxc6666.1688/
The oven is an electric heating appliance that bakes objects at a higher temperature and has the following characteristics:
1. Widely used in precision baking of electronics, electroplating, plastics, printing, pharmaceuticals, PC boards, spray coating, glass, ceramics, wooden building materials, etc.
2. Strong durability: Since the electric heater is sealed in the box, the contact surface with the outside air is small, so it is not easy to be oxidized and corroded.
3． Internal thermal cycle: the baking object is heated evenly.
4． Electrical control is safe, precise and reliable: The main electrical components of this machine adopt professional series products, which are stable and reliable. The machine has novel shape, reasonable structure, large effective working area, full functions, simple operation, convenient maintenance and adjustment, low noise, high reliability, low cost, low energy consumption and high production efficiency.
5. Working principle: The air circulation system adopts the horizontal circulating air supply method of the motor, and the air circulation is uniform and efficient. The wind source is driven by a circulating air-supply motor (using a non-contact switch) to drive the wind wheel (Φ230) through the electric heater to send the hot air out, and then to the air duct to the interior of the oven. The source was cycled again and heated. Ensure uniform indoor temperature. When the temperature value swings due to the opening and closing of the door, the air circulation system can quickly restore the operating state temperature value.
6. Intelligent digital display temperature control system, automatic constant temperature control, PID adjustment, full-scale constant temperature timing function; short circuit, overload protection, etc.
★ Main parameters
1100 * 1400 * 1700mm
1300 * 1600 * 2350mm
Room temperature -80 ℃
180 ℃ (adjustable)
380V / 50HZ
Temperature control accuracy: ± 1.0 ℃ Temperature difference: ± 2.5 ℃
★ Configuration instructions
① Electrical part:
Intelligent temperature control instrument, PID adjustment. Dual meter control, over temperature alarm
AC contactor power adjustment.
Constant temperature timer setting.
The control box and operation panel are placed on the right front of the box.
Low-voltage electrical appliances all use domestic famous brands "Chint" or "Delixi". Temperature controller: Japan RKC brand
② Hot air circulation part:
Centrifugal wind wheel, one-way air supply.
Fan top placement (fully enclosed) Fan power; 1500W * 1 unit.
Horizontal, hot air circulation in left and right boxes
Heating method: evenly arranged on the top.
Heating element: stainless steel heating tube.
Heating power: 18KW.
Shell: made of 1.2mm cold-rolled steel plate, the surface is painted.
Liner: made of 1.2MM stainless steel galvanized sheet.
Coating materials: environmentally friendly paint
Insulation material: Aluminum silicate fiber, 90 mm thick
Sealing material: High temperature resistant asbestos sealing strip
Heating device: High-strength tubular large-area heating component
The bottom of the box is made of flat bottom, and two grooves are set at the bottom for the carriage of the shelving rack.
Double door production.
The door locking device is an alloy steel single lever and an alloy steel hinge.
⑤ Insulation and heat preservation:
The box insulation material is filled with high temperature resistant aluminum silicate cotton.
The door sealing material is: 20 * 20MM high temperature resistant silicon rubber strip seal.
6. Circulatory system
Circulation mode: High pressure horizontal transport wind, good uniformity
Blower motor: long shaft motor with centrifugal blades
Intake: quantity 1 60mm integrated control to adjust air volume
Exhaust: Qty. 1 60mm
★ machine maintenance
① Before going to work, clean up the sundries and wipe the machine clean. Regularly add lubricating grease to moving parts such as guide rails, guide posts, and bearings.
② The workpiece table is a key component that affects the printing quality. It prevents hard objects from colliding. When printing, the ink cannot be used. Organic solvents such as Tianna water are dripped onto the work surface.
③ The electric control panel and keys must be protected from direct or indirect contact with solvents such as water and oil.
④ The paint of the rack is to keep the machine from rusting, and to prevent direct or indirect contact with solvents such as water and oil to cause damage.
⑤ Drain the sewage and dirt in the oil mist combiner in time. Prevent feeding into the pneumatic components and affect the normal operation. Clean the cup regularly and add Peng 2 lubricant to the oil cup of the oil mist combiner.
⑥ When adjusting the restriction valve, you must first loosen the tightening nut before adjusting it by hand. The handle screw on the machine is used for positioning. After it is firmly positioned, it does not need to be tightened with excessive force.
⑦ After work, turn off the power / air source, clean the screen, and keep it properly. Dust-proof / pressure-proof / anti-hard object puncture.
★ Product quotation and description
① Product quotation: This quotation is valid for 30 days
② Payment method:
③ Delivery time:
④ Packaging and transportation methods:
★ After-sales service
① We can provide installation, commissioning and technical training for all manufactured products.
② After installation and commissioning, free warranty for one year (except for wearing parts and man-made damage), and provide maintenance for life.
③ Unscheduled visits and maintenance, site operations, and technical training.
④ After-sales contact information: 0571-86927248 Mr. Wen.
⑤ After-sales service content:
▲ If the equipment fails, please communicate by phone first. If the problem cannot be solved, our company will arrive at the scene to solve the problem as soon as possible.
▲ The after-sales service includes not only equipment maintenance, but also the dedicated support of process technology. Our technicians can conduct on-site technical training and provide a full set of screen printing process technology, information and equipment solutions.
▲ Professional technicians visit from time to time to track the use of user equipment.
▲ Repair and maintenance of screen printing equipment and auxiliary equipment.
▲ Design custom screen printing equipment and auxiliary equipment.
Dongguan Jiabang Machinery Equipment Co., Ltd. was established in 2007. It is a professional production and marketing company dedicated to the research, development, production and sales of solar thermal equipment. Over the years, our company has established high-quality products, reasonable price adjustment, and superior service consciousness, and has successively established customers in many industries such as photoelectric (LED, LCD) integrated circuits, (IC) cameras, mobile phones, displays, and electronic components The internet. At present, the main products are: LED hot air oven, dust-free oven, high temperature oven, thermocompression oven, tunnel oven, clean oven, vacuum nitrogen oven, UV curing machine, constant temperature and humidity test box, etc.
Melting wax sterilization high temperature oven program-controlled digital display drying oven industrial oven
The company has two to three project patents every year. We comply with the needs of the market and industry and meet the various requirements of customers. The products have flexibility and practicality, and create maximum value for customers. Welcome friends from all walks of life to visit, guide and negotiate business.
Contact: Mr. Lu
Phone: 86 0769 81089125
Mobile phone: 13712718109
No.302 Heluling, Huanzhuli Village, Changping Town, Dongguan City, Guangdong, China
Company's main page:
m http://jbjxc6666.1688.co m