I. scope of application
This machine is suitable for the coating of UV-sensitive coatings, inks, and adhesives, followed by injection molding or the printing surface of a variety of materials for instant curing and drying.
1. Printing: widely used in screen printing, offset printing, letterpress printing, self-adhesive trademarks, metal nameplates, PC, PVC, ABS, PS, acrylic, Tedlon, glass, ceramics, electronic parts, single-sided circuit boards Wait.
2. In terms of coating: wood surface bright coating, paper surface coating, plastic floor tiles, PU skin coating, fiber optic cable surface coating, etc.
3． The following aspects: the bonding of circuit board CHIP parts, the bonding of various electronic parts, the bonding of glass, the bonding of liquid crystal chips, and the sealing of terminals.
4． Note type: decorative color plate utensils, decorative wear items (buttons, brooches, hair clips, belt buckles, etc.).
Second, the main technical parameters
Tube power: 5.6kw * 2 sets
Network bandwidth: 600mm
Mesh belt height: 700mm
Conveyor material: high temperature resistant Teflon
Transmission speed: 2-25m / min
1. Instant drying, high production efficiency.
2. After drying, the surface of the print can achieve the effects of high hardness, high gloss, abrasion resistance and solvent resistance.
6. The surface of the box is completely sprayed with plastic, which is beautiful and generous, and resistant to corrosion.
The machine has novel shape, reasonable structure, large effective working area, full functions, simple operation, convenient maintenance and adjustment, low noise, high reliability, low cost, low energy consumption and high production efficiency.
Fourth, the installation of the machine
1. After the machine is unpacked, everything should be in place.
2. The four sides of the machine should reserve the space required for each line of operation.
3. Rotate the screw of the machine foot until the four casters are off the ground, and the four adjusting foot cups are flat until the ground is stable.
4. After the machine is installed, it can be connected to the power supply.
After the power is connected, the machine can be turned on. Generally, the machinery that leaves the factory is adjusted to the best working condition before leaving the factory. If there is no special reason, do not move the machine. Especially adjust the balance handwheel of the conveyor belt, do not move it randomly
Five, the main operating instructions
1. Turn on the power, open the control door, turn on the power, and turn on the air.
运输带的运输速度调到合要求。 2. Turn the main power switch to the 1st position, turn on the temperature control switch, the transport switch, and turn on the switch on the governor to adjust the transport speed of the f conveyor belt to meet the requirements.
流表2有指示. 3. Press the lamp 1 on button, the UV lamp 1 is on, there is an indication on the ammeter; press the lamp 2 on button, the lamp 2 is on, and the ammeter 2 is on the indication.
4. The temperature indicated by the thermometer starts to work. When the temperature rises to 40 ~ 50 ℃, please immediately turn on the fan switch to turn on the fan, otherwise the life of the tube will be shortened. If the temperature exceeds the required temperature of the product, turn off the UV lamp and let the fan reduce the temperature to avoid unnecessary loss to the product.
Six, maintenance and precautions
2. Mechanical drive shafts, bearings and chains should be oiled regularly.
3. If there are sundries on the tube, do not wipe it with your hands directly, wipe with a handkerchief or a clean cloth with alcohol to make the tube work in the best state.
4. Do not turn on the UV machine after the machine is turned on. UV light can cause damage to human skin and eyes.
5. Do not open the control door after starting the machine. It is strictly forbidden to wipe or touch the electric appliances inside with hands or other things (you ca n’t wipe or touch the electric appliances inside with hands or other things after shutting down. .) To avoid electric shock.
6. Clean the dust on electrical parts and components regularly.
Other specifications and models are welcome to order. Our factory has many years of production experience, and you are satisfied with the quality package.