Specifications and configuration:
外形部分：1.2m冷板喷塑（非普通油漆）耐腐蚀，防生锈， (1) Exterior part: 1.2m cold plate spray plastic (non-ordinary paint), corrosion resistance, rust prevention,
内胆尺寸：宽1.2米，高1.52米，深1.0米，内胆四周铺高温隔热棉，使炉外温度不烫手。 (2) Inner liner size: 1.2m wide, 1.52m high, 1.0m deep, high temperature insulation cotton is placed around the inner liner to keep the temperature outside the furnace from being hot.
发热部分：炉腔顶部配0.35KW运风马达一台，配9寸运风风轮,左右水平运风,使炉内温度更加均匀。 (3) Heating part: a 0.35KW wind-driving motor is equipped on the top of the furnace cavity, and a 9-inch wind-driving wind wheel is used to horizontally transport the wind to make the temperature in the furnace more uniform.
电器部分：电源380V，三相五线制，功率8KW，配控制电箱于烤箱顶部，采用日本RKC智能型数显温控器，温度室温至300℃任意可调，功能有PID自整定、自动恒温、温度到后定时报警断电、超温断电、漏电保护、电机过载保护等功能，双温控器控制，使温度更加精准，内部温差±2度。 (4) Electrical part: power supply 380V, three-phase five-wire system, power 8KW, equipped with a control electric box on the top of the oven, using Japanese RKC intelligent digital display temperature controller, the temperature can be adjusted arbitrarily from room temperature to 300 ℃, the function has PID self Functions such as setting, automatic constant temperature, timed alarm power failure, over-temperature power failure, leakage protection, motor overload protection, etc., with dual temperature controller control, make the temperature more accurate, and the internal temperature difference is ± 2 degrees. Other appliances are controlled by genuine Mitsubishi and Zhengtai appliances.
HT 型远红外精密多用途热风循环干燥箱，本箱应用范围广，是吸收引进国产化，替代进口的可靠性理想干燥设备，专用于电子、变压器、电镀、标牌、电力电容器、化工，也适用于其它产品的干燥烘焙行业。 Our factory recently launched a new generation of HT -type far-infrared precision multi-purpose hot air circulation drying boxes. This box has a wide range of applications. It is an ideal drying equipment that absorbs and introduces localization and replaces imported reliability. It is dedicated to electronics, transformers, electroplating, signage, and power. Capacitors and chemicals are also suitable for the drying and baking industry of other products. A strong air circulation system with a unique design of horizontal and vertical air supply to achieve uniform temperature.
structure: The drying box is made of angle steel, steel plate and stainless steel plate. The shell and the working room are filled with aluminum silicate fiber for heat insulation. The two sets of far-infrared heaters are installed in the left and right parts of the working room respectively. Control power on / off adopts intelligent and digital display temperature controller, with P, I, D adjustment function.